Part Number
Definition:
AN ITEM FABRICATED FROM NONMETALLIC SPECIAL SHAPED SECTION. IT MAY BE (1) FORMED TO A SPECIFIC SHAPE WITH OR WITHOUT JOINTS, (2) A SINGLE PIECE WHOSE ENDS HAVE BEEN SECURED TOGETHER TO FORM A SPECIFIC SHAPE, OR (3) A STRAIGHT ITEM FABRICATED TO A SPECIFIC LENGTH FOR A SPECIFIC APPLICATION WITH END CUTS OR JOINTS. ITEMS, EXCEPT FOR MOLDED CORNERS, SLOT(S), PRESS FIT BUTTONS, AND THE LIKE MUST BE OF ONE CONTINUOUS CROSS SECTION. IT IS SPECIFICALLY DESIGNED FOR USE IN APPLICATIONS WHERE THERE IS NO RELATIVE MOTION BETWEEN JOINED PARTS. EXCLUDES BUSHING, NONMETALLIC; PACKING, PERFORMED; PAD, CUSHIONING;AND SEAL, PLAIN. FOR STRAIGHT ITEMS WITH SQUARE END CUTS AND WITHOUT MOUNTING HOLE(S), SLOT(S), OR PRESS FIT BUTTONS, SEE NONMETALLIC SPECIAL SHAPED SECTION.
CAGE Information
| Code | Company |
|---|---|
| 96169 | ELECTRIC BOAT CORPORATION |
Federal Supply Class
Title
PACKING AND GASKET MATERIALS
Inclusions:
INCLUDES GENERAL PURPOSE OIL GREASE, AIR, LIQUID, GAS, AND CHEMICAL SEALS; OAKUM; PREFABRICATED GASKETS AND SEALS DESIGNED FOR A SINGLE SPECIFIC APPLICATION.
Exclusions:
EXCLUDES O-RINGS (FSC 5331); BULK MATERIAL ITEMS, SUCH AS; RUBBER, CORK, AND ASBESTOS SHEETS AND STRIPS (FSG 93); LIQUID GASKET MATERIALS (RTV, PERMATEX, ETC.) (FSG 80); RFI AND EMI SEALS AND GASKETS (FSC 5999), AND ALL SEAL RETAINERS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AARN | FABRICATION METHOD | SOLID |
| AARN | FABRICATION METHOD | SOLID |
| ADWK | MINOR HEIGHT | 0.561 INCHES MINIMUM AND 0.581 INCHES MAXIMUM |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL |
| ABVL | APERTURE DIAMETER | 26.125 INCHES NOMINAL |
| ADVN | CROSS-SECTIONAL HEIGHT | 0.655 INCHES MINIMUM AND 0.675 INCHES MAXIMUM |
| ADWH | CROSS-SECTIONAL WIDTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | CIRCULAR |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | U SHAPE |
| CQCF | CONSTRUCTION | SOLID |
| ABNH | MINOR WIDTH | 0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-15624,CL 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.249 INCHES MINIMUM AND 0.269 INCHES MAXIMUM |