Part Number
Part Number:
NSN:
NIIN:
Item Name:
BEAM , STRUCTURAL
Definition:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.
CAGE Information
| Code | Company |
|---|---|
| 01634 | ALUMINUM CO OF AMERICA |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CNBH | FOURTH TIP INNER RADIUS | 0.040 INCHES NOMINAL |
| CNBH | FOURTH TIP INNER RADIUS | 0.040 INCHES NOMINAL |
| BPXD | LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.937 INCHES NOMINAL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2024 ALLOY AND T8511 TEMPER |
| ADXR | LEFT SIDE TOP FLANGE THICKNESS | 0.081 INCHES NOMINAL |
| ABRY | LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| AARN | FABRICATION METHOD | EXTRUDED |
| AGTA | BASIC SHAPE STYLE | T SHAPE |
| CNBM | FOURTH TIP OUTER RADIUS | 0.040 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 2.312 INCHES NOMINAL |
| MATL | MATERIAL | ALUMINUM ALLOY AMS-QQ-A-200/3, ALLOY 2024 |
| CSMZ | LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| CMZY | FIRST TIP STYLE | FULL RADIUS |
| BQJG | TOP FLANGE WIDTH | 1.875 INCHES NOMINAL |
| CNQM | THIRD TIP STYLE | SQUARE W/ INNER AND OUTER CORNER RADII |
| CRZC | RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| BPXL | FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| BRFD | WEIGHT PER UNIT MEASURE | 0.440 POUNDS PER LINEAR FOOT |
| BPXJ | FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| AJJB | FIRST TIP RADIUS | 0.040 INCHES NOMINAL |
| AJJP | LEG THICKNESS | 0.094 INCHES NOMINAL |
| CNQL | THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| ADXS | RIGHT SIDE TOP FLANGE THICKNESS | 0.081 INCHES NOMINAL |
| BPXG | RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.937 INCHES NOMINAL |