Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 04454 | SENSOR SYSTEMS L.L.C. |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAPN | SECTION QUANTITY | 1 |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.5 FREE AIR SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -2.0/+2.0 OHMS SINGLE SECTION |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 1500.0 SINGLE SECTION |
| ABPM | BODY DIAMETER | 1.080 INCHES MAXIMUM |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.5 KILOHMS SINGLE SECTION |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| ABXF | SHAFT LENGTH | 0.700 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 0.9688 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 1.0620 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | CLAMP RING |
| APXH | TERMINAL LOCATION | REAR END |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAQ | BODY LENGTH | 0.590 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| ABPA | UNDERCUT DIAMETER | 0.975 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0700 INCHES MINIMUM |
| ABWV | SHAFT DIAMETER | 0.1248 INCHES NOMINAL |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |