Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 6T459 | PARKER HANNIFIN CORP AEROSPACE GROUP |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BDSR | SECOND END SPLINE QUANTITY | 12 |
| AMGF | SECOND END PITCH DIAMETER | 1.2000 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.675 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 6 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.0950 INCHES MINIMUM AND 1.1050 INCHES MAXIMUM |
| CSPY | LARGEST STEP DIAMETER | 1.598 INCHES MINIMUM AND 1.602 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 1.1750 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 1.5980 INCHES MINIMUM AND 1.6020 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | STARTER 36E153-4A,F108 ENGINE FOR KC135R AIRCRAFT |
| MATT | MATERIAL | STEEL |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6415 ASSN STD SINGLE MATERIAL RESPONSE |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.2580 INCHES MINIMUM AND 1.2620 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 1.2580 INCHES MINIMUM AND 1.2620 INCHES MAXIMUM |
| AMGE | SECOND END PRESSURE ANGLE | 20.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| FEAT | SPECIAL FEATURES | WSHAFT BODY EXTERNAL THD DATA: LEFT HAND-8 START INVOLUTE THD,1.296 PITCH DIA; FIRST END BORE 0.8530 - 0.8535 IN. DIA,2.390 - 2.400 IN. L W/8 MICROINCH FINISH; SECOND END BORE 0.437 - 0.439 IN. DIA,0.280 IN. L W/16 MICROINCH FINISH |