Part Number
Part Number:
NSN:
NIIN:
Item Name:
SCREW ASSEMBLY , PANEL
Definition:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
CAGE Information
| Code | Company |
|---|---|
| 82577 | RAYTHEON COMPANY DBA RAYTHEON |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATT | MATERIAL | STEEL CORROSION RESISTING STAND-OFF |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TII C2 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| SFTT | SURFACE TREATMENT | CADMIUM FASTENER |
| AASA | THREAD LENGTH | 0.500 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | STEEL CORROSION RESISTING FASTENER |
| AATB | WIDTH BETWEEN FLATS | 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416TII C2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| ABQZ | INTERNAL DRIVE STYLE | W/O INTERNAL DRIVE |
| AGSM | MATERIAL ACCOMMODATED THICKNESS | 0.093 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASB | FASTENER LENGTH | 1.125 INCHES NOMINAL |
| CQBC | MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH |
| AASK | HEAD STYLE | HEXAGON |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5732 FED SPEC SINGLE MATERIAL RESPONSE FASTENER |
| AASU | HEAD HEIGHT | 0.232 INCHES MINIMUM AND 0.237 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM STAND-OFF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-23195 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF |