Part Number
Part Number:
NSN:
NIIN:
Item Name:
NUT , SLEEVE
Definition:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
CAGE Information
| Code |
Company |
| 07187 |
HONEYWELL INTERNATIONAL INC DBA HONE |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES |
| AAJE |
THREAD PITCH DIAMETERS |
+0.2411/+0.2421 INCHES |
| BZRR |
THREAD SERIES |
UNS |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL |
| ACTA |
NUT STYLE |
SLEEVE |
| ANLR |
CROSS-SECTIONAL SHAPE |
ROUND NUT |
| CQFM |
HARDNESS RATING |
NOT RATED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ANLR |
CROSS-SECTIONAL SHAPE |
HEXAGONAL FLANGE |
| AZKQ |
TEMP RATING |
NOT RATED |
| ACVN |
NUT LENGTH |
0.093 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
80 |
| AFGH |
NUT WIDTH ACROSS FLATS |
0.312 INCHES NOMINAL |
| ADBP |
BOSS THICKNESS |
0.032 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ADBN |
BOSS DIAMETER |
0.299 INCHES MINIMUM AND 0.304 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
Similar Parts