Part Number
Definition:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
CAGE Information
| Code | Company |
|---|---|
| 06848 | HONEYWELL INTERNATIONAL INC. AEROSPA |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABKU | FLANGE THICKNESS | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.112 INCHES |
| MATT | MATERIAL | STEEL COMP 4340 OVERALL |
| CRSQ | COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL NUT |
| ANLR | CROSS-SECTIONAL SHAPE | ROUND FLANGE |
| ACTA | NUT STYLE | SLEEVE |
| ANLR | CROSS-SECTIONAL SHAPE | ROUND NUT |
| ACTD | NUT DIAMETER | 0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.380 INCHES MINIMUM AND 0.383 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CP-0480 FSCM 06848 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACVN | NUT LENGTH | 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| AZKQ | TEMP RATING | NOT RATED |
| BZRR | THREAD SERIES | UNC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAJD | THREAD CLASS | 2B |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 40 |