Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSPY | LARGEST STEP DIAMETER | 0.624 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.094 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| AMDR | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES |
| AMDL | FIRST END DIAMETER | 0.4516 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.374 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1042 |
| AMGS | SECOND END HOLE DIAMETER | 0.1250 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
| AAHP | SECOND END STYLE | CROSS DRILLED AND CIRCULAR GROOVED |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.4043 INCHES NOMINAL |
| BDSQ | FIRST END SPLINE QUANTITY | 11 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.4516 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 0.625 INCHES NOMINAL |
| AAHW | SECOND END GROOVE WIDTH | 0.0280 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 5.452 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 4 |
| AAHX | SECOND END GROOVE DIAMETER | 0.3820 INCHES MINIMUM AND 0.3840 INCHES MAXIMUM |
| AMDS | FIRST END PITCH DIAMETER | 0.4583 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.4050 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM |