Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
Code | Company |
---|---|
11243 | COSMODYNE LLC |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
APGF | DESIGN TYPE | NONREUSABLE |
ADNH | FILTRATION RATING IN MICRONS | 11.0 NOMINAL |
ADNK | FLOW DIRECTION | OUTSIDE IN |
CXZX | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
AZKQ | TEMP RATING | -22.0 DEG FAHRENHEIT NOMINAL AND 212.0 DEG FAHRENHEIT MAXIMUM |
ADNQ | DIFFERENTIAL PRESSURE | 150.0 POUNDS PER SQUARE INCH |
STYL | STYLE DESIGNATOR | CYLINDRICAL W/INTEGRAL OUTER CASING |
AZTL | BODY OVERALL LENGTH | 11.360 INCHES NOMINAL |
THSD | THREAD SERIES DESIGNATOR | UNF |
MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
ABPM | BODY DIAMETER | 5.000 INCHES NOMINAL |
CRXW | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE |
CQJX | NOMINAL THREAD SIZE | 1.500 INCHES |
ADNP | DROP PRESSURE | 11.0 POUNDS PER SQUARE INCH |
MATT | MATERIAL | PAPER FILTERING MEDIUM |
FEAT | SPECIAL FEATURES | NHA,FILTER ASSEMBLY COMPRESSOR LUBE OIL |
ADNL | FILTERING SURFACE AREA | 11.875 SQUARE FEET |