Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ADJS | EXTERIOR COLOR | NATURAL |
| CRXX | MEASURING METHOD AND LENGTH | 71.250 INCHES NOMINAL OVERALL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| TEST | TEST DATA DOCUMENT | 10001-1550309 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE AND AIR SINGLE RESPONSE AND WATER, FRESH SINGLE RESPONSE |
| CMLP | THREAD QUANTITY PER INCH | 18 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ABKV | OUTSIDE DIAMETER | 0.069 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 4.500 POUNDS PER SQUARE INCH |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, BUNA-N |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | ERR-070 |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| CQBD | BURST TEST PRESSURE | 9.000 POUNDS PER SQUARE INCH |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| CQGM | MAXIMUM OPERATING PRESSURE | 2.250 POUNDS PER SQUARE INCH |
| AAJD | THREAD CLASS | 2B 1ST END |
| AARX | INSIDE DIAMETER | 0.375 INCHES MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |