National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
GENERATOR , ENGINE ACCESSORY
Definition:
A GENERATOR PRIMARILY DESIGNED TO BE MOUNTED ON AN INTERNAL COMBUSTION ENGINE, AND TO BE DRIVEN BY THE ENGINE TO KEEP THE BATTERY IN A CHARGED CONDITION. MAY ALSO SUPPLY CURRENT FOR THE ENGINE IGNITION SYSTEM AND/OR ELECTRICAL EQUIPMENT WHICH IS CONNECTED TO THE BATTERY CIRCUIT. INCLUDES ALTERNATING CURRENT GENERATORS DESIGNED FOR USE WITH A RECTIFIER. EXCLUDES THE MAJOR GENERATOR OF "GENERATING SETS". FOR GENERATORS SPECIFICALLY DESIGNED FOR AIRCRAFT USE AND NOT MOUNTED ON THE ENGINE, SEE GENERATOR, DIRECT CURRENT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 1105906 | 61928 | A | 5 | 9 | 5 | MB | ||
| 5639535 | 19207 | A | 5 | 2 | 1 | MB | ||
| 0E1629 | 92392 | H | 5 | 9 | 5 | MB | ||
| 1105906 | 7X677 | A | C | 1 | 5 | ZZ | 9X | |
| 1105906 | 16764 | R | 3 | 9 | 5 | MB | ||
| 1105906 | 1LW55 | A | 5 | 2 | 5 | ZZ | ||
| 1105906 | 24617 | A | 5 | 9 | 5 | MB |
CAGE Information
| Code | Company |
|---|---|
| 16764 | GENERAL MOTORS CORP DELCO REMY DIV |
| 61928 | GENERAL MOTORS CORP AC-DELCO DIV GOV |
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
| 92392 | ALLIS-CHALMERS CORP |
| 7X677 | GENERAL MOTORS LLC DBA GENERAL MOTOR |
| 1LW55 | REMY INC. |
| 24617 | GENERAL MOTORS CORP |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNF |
| BZRR | THREAD SERIES | UNF |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 14 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 880 |
| ABSA | SPLINE QUANTITY | 6 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| AAUK | SPLINE WIDTH | 0.216 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.906 INCHES NOMINAL |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.243 INCHES MINIMUM AND 7.257 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.874 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| BCGT | COTTER PIN HOLE | INCLUDED |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 26.0 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1500 |
| BCGS | SHAFT DRIVE END STYLE | SPLINED SHAFT END, THREADED |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.328 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.875 INCHES NOMINAL |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.500 INCHES NOMINAL |
| AAUH | SPLINE MINOR DIAMETER | ANY ACCEPTABLE |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | NOT RATED |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| AWDP | THREAD DIAMETER | 0.625 INCHES NOMINAL |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 201.0 |
| CFHL | THREAD CLASS | 2A |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 8.0 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 1800 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| BCGN | GROUNDING METHOD | INTERNAL |
| AXFH | SPLINE LENGTH | 1.938 INCHES NOMINAL |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.181 INCHES MINIMUM AND 8.195 INCHES MAXIMUM |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.438 INCHES NOMINAL |