National Stock Number (NSN) Output Data
Definition:
A GENERATOR PRIMARILY DESIGNED TO BE MOUNTED ON AN INTERNAL COMBUSTION ENGINE, AND TO BE DRIVEN BY THE ENGINE TO KEEP THE BATTERY IN A CHARGED CONDITION. MAY ALSO SUPPLY CURRENT FOR THE ENGINE IGNITION SYSTEM AND/OR ELECTRICAL EQUIPMENT WHICH IS CONNECTED TO THE BATTERY CIRCUIT. INCLUDES ALTERNATING CURRENT GENERATORS DESIGNED FOR USE WITH A RECTIFIER. EXCLUDES THE MAJOR GENERATOR OF "GENERATING SETS". FOR GENERATORS SPECIFICALLY DESIGNED FOR AIRCRAFT USE AND NOT MOUNTED ON THE ENGINE, SEE GENERATOR, DIRECT CURRENT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 1035G1 | 56442 | F | 5 | 9 | 5 | AX | ||
| 1117495 | 97907 | Y | 5 | 2 | 2 | PA | ||
| 874362 | 12603 | R | 5 | 9 | X | XX | ||
| 7355736 | 19207 | A | 5 | 2 | X | XX | ||
| 1117495 | 16764 | R | 3 | 9 | X | XX | ||
| 1922302 | 1LW55 | A | 5 | 2 | 5 | ZZ | ||
| 1117495 | 24617 | A | 5 | 9 | 3 | AX | ||
| 1117495 | 1LW55 | A | 5 | 2 | 5 | ZZ | ||
| MD15624 | 76558 | F | 5 | 9 | X | XX | ||
| 1922302 | 16764 | R | 5 | 9 | 5 | TG | ||
| 874362 | 89749 | A | 5 | 2 | 5 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 12603 | CLARK EQUIPMENT CO |
| 56442 | DIAMOND REO TRUCK CO |
| 97907 | TEREX CORP |
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
| 16764 | GENERAL MOTORS CORP DELCO REMY DIV |
| 1LW55 | REMY INC. |
| 24617 | GENERAL MOTORS CORP |
| 76558 | MWM-MURPHY DIESEL CO |
| 89749 | CLARK MATERIAL HANDLING COMPANY |
Federal Supply Class
Title
ENGINE ELECTRICAL SYSTEM COMPONE
Inclusions:
INCLUDES GENERATORS; MAGNETOS; SPARK PLUGS; IGNITION COILS; IGNITION DISTRIBUTORS; ENGINE VOLTAGE REGULATORS; IGNITION HARNESS ASSEMBLIES; STARTING MOTORS FOR ENGINES.
Exclusions:
EXCLUDES VEHICULAR LIGHTING FIXTURES (FSC 6220) AND AIRCRAFT GENERATORS (FSC 2925).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.874 INCHES MINIMUM AND 3.876 INCHES MAXIMUM |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.874 INCHES MINIMUM AND 3.876 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNF |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.243 INCHES MINIMUM AND 7.257 INCHES MAXIMUM |
| AWDP | THREAD DIAMETER | 0.500 INCHES NOMINAL |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 25.0 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 1.391 INCHES NOMINAL |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.874 INCHES MINIMUM AND 3.876 INCHES MAXIMUM |
| AFYS | KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.118 INCHES MINIMUM AND 8.132 INCHES MAXIMUM |
| ABPT | SECOND STEP DIAMETER | 0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1600 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1250 |
| AHZV | SUBMERSIBILITY | SUBMERSIBLE |
| AASA | THREAD LENGTH | 0.796 INCHES NOMINAL |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 201.0 |
| CFHL | THREAD CLASS | 2A |
| ABVA | UNTHREADED PORTION LENGTH | 1.235 INCHES NOMINAL |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 159.0 |
| ABRR | KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| BCGN | GROUNDING METHOD | INTERNAL |
| ELEC | VOLTAGE IN VOLTS | 24.0 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |