National Stock Number (NSN) Output Data
Definition:
A GENERATOR PRIMARILY DESIGNED TO BE MOUNTED ON AN INTERNAL COMBUSTION ENGINE, AND TO BE DRIVEN BY THE ENGINE TO KEEP THE BATTERY IN A CHARGED CONDITION. MAY ALSO SUPPLY CURRENT FOR THE ENGINE IGNITION SYSTEM AND/OR ELECTRICAL EQUIPMENT WHICH IS CONNECTED TO THE BATTERY CIRCUIT. INCLUDES ALTERNATING CURRENT GENERATORS DESIGNED FOR USE WITH A RECTIFIER. EXCLUDES THE MAJOR GENERATOR OF "GENERATING SETS". FOR GENERATORS SPECIFICALLY DESIGNED FOR AIRCRAFT USE AND NOT MOUNTED ON THE ENGINE, SEE GENERATOR, DIRECT CURRENT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 74511857 | 6N299 | A | C | 1 | 6 | ZZ | AC | |
| 1102062 | 1LW55 | A | 3 | 2 | 5 | ZZ | ||
| 664858 | 12603 | R | 5 | 9 | 5 | AX | ||
| 1102062 | 61928 | A | 5 | 9 | 5 | AX | ||
| 1102062 | 16764 | R | 5 | 9 | 2 | AX | ||
| 59UT | 1LW55 | A | 3 | 2 | 5 | ZZ | ||
| 1102062 | 24617 | A | 5 | 9 | 6 | AX | ||
| 59UT | 16764 | R | 5 | 9 | 5 | AX |
CAGE Information
| Code | Company |
|---|---|
| 12603 | CLARK EQUIPMENT CO |
| 6N299 | AGCO CORP PARTS OPN |
| 1LW55 | REMY INC. |
| 61928 | GENERAL MOTORS CORP AC-DELCO DIV GOV |
| 16764 | GENERAL MOTORS CORP DELCO REMY DIV |
| 24617 | GENERAL MOTORS CORP |
Federal Supply Class
Title
ENGINE ELECTRICAL SYSTEM COMPONE
Inclusions:
INCLUDES GENERATORS; MAGNETOS; SPARK PLUGS; IGNITION COILS; IGNITION DISTRIBUTORS; ENGINE VOLTAGE REGULATORS; IGNITION HARNESS ASSEMBLIES; STARTING MOTORS FOR ENGINES.
Exclusions:
EXCLUDES VEHICULAR LIGHTING FIXTURES (FSC 6220) AND AIRCRAFT GENERATORS (FSC 2925).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| AWDP | THREAD DIAMETER | 0.312 INCHES NOMINAL |
| ABVA | UNTHREADED PORTION LENGTH | 0.690 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.060 INCHES NOMINAL |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.316 INCHES MINIMUM AND 0.324 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AFYS | KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| ABFF | FURNISHED ITEMS | WOODRUFF KEY |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 164.0 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1680 |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| ABPT | SECOND STEP DIAMETER | 0.6684 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.115 INCHES MINIMUM AND 7.139 INCHES MAXIMUM |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.445 INCHES MINIMUM AND 8.569 INCHES MAXIMUM |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| BCGN | GROUNDING METHOD | EXTERNAL |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 0.864 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| CFHL | THREAD CLASS | 2A |
| BZRR | THREAD SERIES | UNC |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ABRR | KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.060 INCHES NOMINAL |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 14.0 |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.428 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |