Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 0EBU2 | VAMISTOR/WESTON DIV OF VAMISTOR CORP |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADAT | BODY WIDTH | 0.200 INCHES MAXIMUM |
| AAPN | SECTION QUANTITY | 1 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CBME | CUBIC MEASURE | 0.052 CUBIC INCHES |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 7TH SECONDARY QUALITY |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION |
| ABXF | SHAFT LENGTH | 0.045 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABTB | MOUNTING HOLE DIAMETER | 0.090 NOMINAL MILS AND 0.098 NOMINAL CENTIMETERS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 8280.0 MINIMUM AND 13680.0 MAXIMUM |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| ADAU | BODY HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.513 INCHES MINIMUM AND 0.526 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 OHMS C AND BETTER FLOORING |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | 94580-966034 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEFL | MAXIMUM RUNNING TORQUE | 10.00 INCH-OUNCES |
| AEFK | MAXIMUM STARTING TORQUE | 10.00 INCH-OUNCES |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 8280.0 MINIMUM AND 13680.0 MAXIMUM |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ABWV | SHAFT DIAMETER | 0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |