Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 80294 | BOURNS INSTRUMENTS INC |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 7TH SECONDARY QUALITY |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.700 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39035/1 GOVERNMENT SPECIFICATION |
| AAPN | SECTION QUANTITY | 1 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| ABTB | MOUNTING HOLE DIAMETER | 0.093 NOMINAL INCHES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| AEFL | MAXIMUM RUNNING TORQUE | 8.00 INCH-OUNCES |
| ADAT | BODY WIDTH | 0.190 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
| CBME | CUBIC MEASURE | 0.075 CUBIC INCHES |
| ADAU | BODY HEIGHT | 0.315 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| ABWV | SHAFT DIAMETER | 0.115 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | MOD5240B BDHI; AGAVGMISSILE, AIR-TO-AIR, SPARROW (AIM-7); ORVER THE HORIZON BACK SCANNER (OTH-B) PROGRAM (AN/FPS-118); SUPPORT EQUIPMENT, B-1 AIRCRAFT; SONAR ACOUSTIC MISCELLANEOUS; HELICOPTER, ADVANCE ATTACK, AH-1W; SPRUANCE CLASS DD (963); TICONDEROGA CLASS CG (47); HELICOPTER, MH-53E; KIDD CLASS DDG |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AEFK | MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.058 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| ADAQ | BODY LENGTH | 1.250 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.400 NOMINAL INCHES |
| ABJT | TERMINAL LENGTH | 0.500 INCHES NOMINAL |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |