National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
GEAR , BEVEL
Definition:
A GEAR IN THE FORM OF A FRUSTUM OF A CONE, WITH STRAIGHT, SKEWED, OR CURVED TEETH, CUT ON THE EXTERNAL FACE. SEE ALSO GEAR, ANTIBACKLASH, BEVEL.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 7351190 | 19207 | A | 5 | 2 | X | XX | ||
| 518509 | 02978 | A | 3 | 2 | X | XX |
CAGE Information
| Code | Company |
|---|---|
| 02978 | L-3 COMMUNICATIONS CORPORATION DBA C |
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CWTX | HUB NOMINAL DIAMETER | 1.190 INCHES FIRST END |
| CWQD | PITCH ANGLE | 34.2158 DEGREES |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 1.372 INCHES SECOND END |
| AAQL | BODY STYLE | PLAIN, SOLID |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE, FRONT HUB RECESSED, BACK HUB PROTRUDING |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM BODY AND 34.0 ROCKWELL C MAXIMUM BODY |
| CWRS | BORE NOMINAL DIAMETER | 0.922 INCHES BOTH ENDS |
| CWTB | COUNTERBORE NOMINAL DEPTH | 2.380 INCHES SECOND END |
| AJLA | TEETH QUANTITY | 17 |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM TEETH AND 62.0 ROCKWELL C MAXIMUM TEETH |
| CWMW | TEETH TYPE | STRAIGHT |
| AGJS | PITCH DIAMETER | 2.6154 INCHES NOMINAL |
| CWRB | BODY RECESS NOMINAL DEPTH | 0.0920 INCHES FIRST END |
| CWFR | NOMINAL OVERALL LENGTH | 3.590 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13048 FS8615,FS8620 OR FS8720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | STEEL OVERALL |
| FEAT | SPECIAL FEATURES | TOOTH PRESSURE ANGLE 30.0 DEG |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.9334 INCHES |
| CWRX | BORE NOMINAL DEPTH | 3.590 INCHES BOTH ENDS |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 1.0600 INCHES SECOND END |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 0.9000 INCHES NOMINAL BOTH ENDS |
| CWRM | FACE NOMINAL WIDTH | 0.720 INCHES |
| ABSA | SPLINE QUANTITY | 18 BOTH ENDS |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 2.590 INCHES SECOND END |