National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
GEAR , ANTIBACKLASH , SPUR
Definition:
AN ITEM HAVING ONE FIXED GEAR AND ONE FREE GEAR, BOTH HAVING THE SAME COMPLEMENT OF SPUR GEAR TEETH, MOUNTED ON A COMMON HUB. THE FREE GEAR IS ATTACHED TO THE FIXED GEAR BY SPRINGS AND OPERATES AS ONE GEAR. UPON INSTALLATION WITH THE MATING GEAR, THE TEETH OF THE FREE MOVING GEAR ARE PRESET TO MESH WITH TEETH OTHER THAN THOSE OF THE FIXED GEAR. THIS SPRING TENSION BETWEEN THE FIXED GEAR AND THE FREE GEAR ELIMINATES ANY FREE MOTION BETWEEN THE DRIVER AND THE DRIVEN GEAR. THE GEAR IS USED WHERE IDENTICAL AND ACCURATE TRANSMITTED MOTION BETWEEN GEARS IS REQUIRED.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| P4-3-96 | 00141 | A | 3 | 2 | 4 | AX | ||
| 1319900042 | 57057 | A | 3 | 2 | 5 | AX |
CAGE Information
| Code | Company |
|---|---|
| 00141 | PRECISION INDUSTRIAL COMPONENTS LLC |
| 57057 | NAVCOM DEFENSE ELECTRONICS INC. |
Federal Supply Class
Title
GEARS, PULLEYS, SPROCKETS, AND T
Inclusions:
INCLUDES POWER TRANSMISSION CHAIN; MATCHED GEAR SETS.
Exclusions:
EXCLUDES REDUCTION GEARS (FSC 3010).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| SFTT | SURFACE TREATMENT | PASSIVATE HUB |
| SFTT | SURFACE TREATMENT | PASSIVATE HUB |
| AJLA | TEETH QUANTITY | 96 |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 0.104 INCHES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.224 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.5310 INCHES |
| AGJS | PITCH DIAMETER | 1.5000 INCHES NOMINAL |
| CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| MATT | MATERIAL | STEEL COMP 303 HUB |
| CWTR | HUB STYLE DESIGNATOR | THREADED SECOND END |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 TEETH |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE HUB |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE TEETH |
| SFTT | SURFACE TREATMENT | ANODIZE TEETH |
| CWRS | BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| CWNH | TOOTH FORM | STANDARD |