Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASU | HEAD HEIGHT | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| AASK | HEAD STYLE | KNURLED NO. 4 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.599 INCHES MINIMUM AND 0.651 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| AASA | THREAD LENGTH | 0.186 INCHES MINIMUM AND 0.218 INCHES MAXIMUM |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJD | THREAD CLASS | 2A |
| AASB | FASTENER LENGTH | 0.896 INCHES MINIMUM AND 0.916 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAWC | FIRST DIAMETER FROM HEAD | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |