National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
SHAFT , STRAIGHT
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| R11100 |
23926 |
A |
5 |
9 |
5 |
ZZ |
|
|
| 11100 |
23926 |
A |
3 |
2 |
5 |
ZZ |
|
|
CAGE Information
| Code |
Company |
| 23926 |
KOMATSU AMERICA INTL CO |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AMDL |
FIRST END DIAMETER |
0.9980 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM |
| AMDL |
FIRST END DIAMETER |
0.9980 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM |
| AAHP |
SECOND END STYLE |
CIRCULAR GROOVED |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAGZ |
FIRST END STYLE |
PLAIN |
| AAHX |
SECOND END GROOVE DIAMETER |
0.6250 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL COMP 1020 |
| AMFQ |
SECOND END DISTANCE FROM END TO GROOVE |
1.375 INCHES MINIMUM AND 2.125 INCHES MAXIMUM |
| AMFZ |
SECOND END DIAMETER |
0.9990 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
14.000 INCHES NOMINAL |
Similar Parts