National Stock Number (NSN) Output Data
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| SM-B-157368 | 80063 | A | 3 | 2 | A | TX | ||
| 52835 | 82423 | H | 5 | 9 | 5 | TX |
CAGE Information
| Code | Company |
|---|---|
| 80063 | US ARMY COMMUNICATIONS & ELECTRONICS |
| 82423 | KLEINSCHMIDT INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMFZ | SECOND END DIAMETER | 0.2495 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | FLAT GROOVED |
| AMHW | SECOND END DISTANCE BETWEEN SECOND AND THIRD GROOVE CENTERS | 0.1000 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1018 |
| AMFG | FIRST END GROOVED FLAT LENGTH | 0.3125 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.0625 INCHES NOMINAL |
| AMFH | FIRST END GROOVED FLAT DEPTH | 0.0295 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.906 INCHES NOMINAL |
| AAHW | SECOND END GROOVE WIDTH | 0.0310 INCHES NOMINAL |
| AAHX | SECOND END GROOVE DIAMETER | 0.2100 INCHES NOMINAL |
| AMHT | SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.1000 INCHES NOMINAL |
| AMCM | FIRST END DISTANCE FROM END TO FLAT | 0.3373 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI C1018 ASSN STD SINGLE MATERIAL RESPONSE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| AAHP | SECOND END STYLE | THREE CIRCULAR GROOVES |
| AMDL | FIRST END DIAMETER | 0.2495 INCHES NOMINAL |