National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 240-5257112-2 | 14170 | R | 5 | 9 | 2 | SB | ||
| 240-5257112-2 | 63910 | A | 3 | 2 | 5 | ZZ | ||
| 240-5257112-2 | 7B709 | R | 5 | 9 | 2 | ZZ | ||
| 240-5257112-2 | 0WLU1 | F | 5 | 9 | 2 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 0WLU1 | GENERAL DYNAMICS CORP CONVAIR DIV LI |
| 14170 | HUGHES MISSILE SYSTEMS CO SAN DIEGO |
| 63910 | BAE SYSTEMS INFORMATION AND ELECTRON |
| 7B709 | TRACOR FLIGHT SYSTEMS INC SUB OF TRA |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| CSYM | SURFACE FINISH | 40.0 MICROINCHES |
| AMDX | FIRST END HOLE DIAMETER | 0.3750 INCHES MINIMUM AND 0.3770 INCHES MAXIMUM |
| AAHP | SECOND END STYLE | EXTERNAL THREADED |
| CSPY | LARGEST STEP DIAMETER | 2.060 INCHES MINIMUM AND 2.090 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 11.880 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.830 INCHES NOMINAL |
| AMEB | FIRST END HOLE DEPTH | 2.060 INCHES MINIMUM AND 2.090 INCHES MAXIMUM |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.750 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |