National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 210N86F1 | 27315 | A | 3 | 2 | 3 | AX | ||
| 210N86 | 27315 | A | 5 | 2 | 1 | AX |
CAGE Information
| Code | Company |
|---|---|
| 27315 | MORRIS MATERIAL HANDLING INC. |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 2.4000 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 2.000 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 19.781 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 10 |
| AGAV | END ITEM IDENTIFICATION | HARNISCHFEGER CORP.;MODEL M320T2,CRANE TRUCK MOUNTED,NSN 3810-00-151-4431 |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 0.875 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| MATT | MATERIAL | STEEL |
| CSPY | LARGEST STEP DIAMETER | 3.312 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 2.7500 INCHES NOMINAL |
| BDSQ | FIRST END SPLINE QUANTITY | 21 |
| AAHP | SECOND END STYLE | INTERNAL THREADED |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 2.7500 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.6250 INCHES NOMINAL |