National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| 215868 |
44674 |
A |
3 |
2 |
X |
XX |
|
|
| 5244856 |
19207 |
A |
5 |
2 |
X |
XX |
|
|
CAGE Information
| Code |
Company |
| 19207 |
U S ARMY TANK AUTOMOTIVE COMMAND AMS |
| 44674 |
THE OILGEAR COMPANY |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AMDL |
FIRST END DIAMETER |
0.5180 INCHES MINIMUM AND 0.5190 INCHES MAXIMUM |
| ATPC |
STEP QUANTITY |
7 |
| MATT |
MATERIAL |
STEEL COMP 1040 |
| BDSQ |
FIRST END SPLINE QUANTITY |
6 |
| AMDM |
FIRST END SPLINE LENGTH |
1.000 INCHES NOMINAL |
| AMFT |
SECOND END KEYWAY DEPTH |
0.0937 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
EXTERNALLY THREADED AND FLAT KEYWAY |
| ABHP |
OVERALL LENGTH |
4.671 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
SPLINED (STRAIGHT) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI OR SAE ASSN STD SINGLE MATERIAL RESPONSE |
| CSPY |
LARGEST STEP DIAMETER |
0.8125 INCHES NOMINAL |
| AMFS |
SECOND END EXTERNAL KEYWAY LENGTH |
0.468 INCHES NOMINAL |
| AMDP |
FIRST END SPLINE MAJOR DIAMETER |
0.5190 INCHES MAXIMUM |
| AMDN |
FIRST END SPLINE MINOR DIAMETER |
0.4300 INCHES MINIMUM |
| AMFZ |
SECOND END DIAMETER |
0.5810 INCHES MINIMUM AND 0.5860 INCHES MAXIMUM |
| AMHA |
SECOND END EXTERNAL THREAD LENGTH |
0.34375 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
TRAVERSING MECHANISM COMBAT TANK |
Similar Parts