National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| T84J2 |
79410 |
A |
3 |
9 |
X |
XX |
|
|
| 5628144 |
19207 |
A |
5 |
2 |
X |
XX |
|
|
| 900789 |
58275 |
H |
5 |
9 |
X |
XX |
|
|
CAGE Information
| Code |
Company |
| 19207 |
U S ARMY TANK AUTOMOTIVE COMMAND AMS |
| 79410 |
LIBERTY VENTURES INTI LLC |
| 58275 |
SASCO INC CANADIAN DIV |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AMFW |
SECOND END DISTANCE FROM KEYWAY CENTER TO END |
3.875 INCHES NOMINAL |
| AMGB |
SECOND END SPLINE MINOR DIAMETER |
1.0230 INCHES MINIMUM |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| BDSR |
SECOND END SPLINE QUANTITY |
16 |
| AAGZ |
FIRST END STYLE |
PLAIN |
| ABHP |
OVERALL LENGTH |
10.937 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
CIRCULAR GROOVED, WOODRUFF KEYWAY AND SPLINED (STRAIGHT) |
| AMGC |
SECOND END SPLINE MAJOR DIAMETER |
1.1750 INCHES MINIMUM |
| AMDL |
FIRST END DIAMETER |
0.5960 INCHES MINIMUM |
| AMFZ |
SECOND END DIAMETER |
1.1808 INCHES MINIMUM AND 1.1812 INCHES MAXIMUM |
| CSPY |
LARGEST STEP DIAMETER |
1.3735 INCHES MINIMUM AND 1.3740 INCHES MAXIMUM |
| AMFR |
SECOND END KEYWAY WIDTH |
0.1250 INCHES NOMINAL |
| AMFQ |
SECOND END DISTANCE FROM END TO GROOVE |
3.437 INCHES MINIMUM AND 3.483 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL |
| AMGA |
SECOND END SPLINE LENGTH |
3.437 INCHES NOMINAL |
| AMFS |
SECOND END EXTERNAL KEYWAY LENGTH |
0.500 INCHES NOMINAL |
| AAHW |
SECOND END GROOVE WIDTH |
0.1090 INCHES NOMINAL |
| ATPC |
STEP QUANTITY |
5 |
| ZZZV |
FSC APPLICATION DATA |
TRANSMISSION MAIN SHAFT,CARRIER,CARGO |
| AAHX |
SECOND END GROOVE DIAMETER |
1.0620 INCHES NOMINAL |
Similar Parts