National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 7269151 | 19204 | A | 3 | 2 | 1 | BF |
CAGE Information
| Code | Company |
|---|---|
| 19204 | ARMY UNITED STATES DEPARTMENT OF THE |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAGZ | FIRST END STYLE | PLAIN |
| CSPY | LARGEST STEP DIAMETER | 0.081 INCHES MINIMUM AND 0.086 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624,COMP 6150/4150 MIL SPEC SINGLE MATERIAL RESPONSE |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| AMDL | FIRST END DIAMETER | 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL |
| ABHP | OVERALL LENGTH | 1.385 INCHES MINIMUM AND 1.400 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 3 |
| FEAT | SPECIAL FEATURES | TAPERED ON BOTH ENDS,0.060 IN. MIN.-0.070 IN. MAX. TAPER LG; 30 DEG. BOTH SIDES |
| AAHN | END SIMILARITY | IDENTICAL |