National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| E7696 | 81039 | A | 3 | 2 | 2 | SE |
CAGE Information
| Code | Company |
|---|---|
| 81039 | GE AVIATION SYSTEMS LLC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSPY | LARGEST STEP DIAMETER | 0.187 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ZZZV | FSC APPLICATION DATA | ACTUATOR,ACFT |
| AAGZ | FIRST END STYLE | PLAIN |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| ABHP | OVERALL LENGTH | 2.550 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL |
| ATPC | STEP QUANTITY | 3 |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.180 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| AMGS | SECOND END HOLE DIAMETER | 0.0465 INCHES NOMINAL |