National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| KC1716 | 56442 | F | 5 | 9 | 6 | AX | ||
| 914862 | 58275 | H | 5 | 9 | X | TG | ||
| KC1716 | 22852 | F | 5 | 9 | 6 | AX | ||
| 9P21 | 72447 | A | 5 | 9 | 6 | AX | ||
| 2564T2 | 56442 | F | 5 | 9 | 6 | AX | ||
| 7061266 | 19207 | A | 5 | 2 | A | AX | ||
| 9P21 | 95019 | A | 3 | 2 | E | AX |
CAGE Information
| Code | Company |
|---|---|
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
| 56442 | DIAMOND REO TRUCK CO |
| 58275 | SASCO INC CANADIAN DIV |
| 22852 | SPALLA INC |
| 72447 | DANA COMMERCIAL VEHICLE MANUFACTURIN |
| 95019 | DANA CORP SPICER TRANSMISSION DIV |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| ZZZV | FSC APPLICATION DATA | INTERMEDIATE,POWER TAKE-OFF,VEHICULAR TRANSMISSION |
| AMFP | SECOND END FLAT LENGTH | 0.198 INCHES MINIMUM AND 0.208 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 0.7510 INCHES MINIMUM AND 0.7515 INCHES MAXIMUM |
| AAHP | SECOND END STYLE | SLOTTED |
| AMDW | FIRST END SLOT DEPTH | 0.125 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AKTN | SECOND END SLOT WIDTH | 0.125 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A331 ASSN STD ALL MATERIAL RESPONSES |
| AMFJ | SECOND END DISTANCE FROM END TO FLAT | 0.396 INCHES MINIMUM AND 0.401 INCHES MAXIMUM |
| CSPY | LARGEST STEP DIAMETER | 0.751 INCHES NOMINAL |
| AMGR | SECOND END SLOT DEPTH | 0.125 INCHES NOMINAL |
| AKTM | FIRST END SLOT WIDTH | 0.125 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 4 |
| ABHP | OVERALL LENGTH | 4.875 INCHES NOMINAL |