National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| EE59701 | 45152 | A | 3 | 2 | 6 | AX |
CAGE Information
| Code | Company |
|---|---|
| 45152 | OSHKOSH CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 2.4780 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 6 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.9100 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDM | FIRST END SPLINE LENGTH | 3.050 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 2.5340 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 14.562 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| MATT | MATERIAL | STEEL |
| AMFZ | SECOND END DIAMETER | 2.2300 INCHES NOMINAL |
| AAHP | SECOND END STYLE | SPLINED (STRAIGHT) |
| BDSQ | FIRST END SPLINE QUANTITY | 16 |
| CSPY | LARGEST STEP DIAMETER | 3.460 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 2.2300 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 3.430 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 2.4780 INCHES NOMINAL |
| BDSR | SECOND END SPLINE QUANTITY | 10 |