National Stock Number (NSN) Output Data
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 2P1170 | 11083 | A | 3 | 2 | 4 | 9Z | ||
| IPD2P1170 | 55883 | A | 5 | 2 | 6 | AX |
CAGE Information
| Code | Company |
|---|---|
| 11083 | CATERPILLAR INC. DBA CATERPILLAR DIV |
| 55883 | INDUSTRIAL PARTS DEPOT INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | 2.620 INCHES NOMINAL |
| AMEB | FIRST END HOLE DEPTH | 0.720 INCHES NOMINAL |
| AAHW | SECOND END GROOVE WIDTH | 0.2500 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 1.1225 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | LONGITUDINAL LUBRICATION HOLE,PLUGGED END |
| AAHP | SECOND END STYLE | CROSS DRILLED AND CIRCULAR GROOVED |
| AMGS | SECOND END HOLE DIAMETER | 0.1620 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
| AAHX | SECOND END GROOVE DIAMETER | 1.0080 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.656 INCHES NOMINAL |
| AMHD | SECOND END HOLE DEPTH | 0.720 INCHES NOMINAL |
| AMDX | FIRST END HOLE DIAMETER | 0.1600 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.250 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.395 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.1225 INCHES NOMINAL |