National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 499814PC9 | 10001 | A | 3 | 2 | X | XX |
CAGE Information
| Code | Company |
|---|---|
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | 1.531 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | PLAIN |
| FEAT | SPECIAL FEATURES | SECOND END THD INTERNAL 1/4-28 X 0.375 IN. DP AND THD 6-32 TAP 0.875 IN. FROM FIRST END |
| CSPY | LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL |
| ACMD | SECOND END WIDTH ACROSS FLATS | 0.500 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.2190 INCHES NOMINAL |
| CTBM | SECOND END STEP LENGTH | 1.094 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| ATPC | STEP QUANTITY | 2 |
| AAHP | SECOND END STYLE | HEXAGONAL |
| AMFZ | SECOND END DIAMETER | 0.5000 INCHES NOMINAL |