National Stock Number (NSN) Output Data
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 62024 | 10237 | A | 3 | 2 | 6 | AX | ||
| 2520001795459 | SCY13 | A | 5 | 9 | 9 | YP | ||
| 11635961 | 19207 | A | 3 | 2 | A | AX |
CAGE Information
| Code | Company |
|---|---|
| 10237 | CADILLAC GAGE TEXTRON INC. |
| SCY13 | E.C.A ETABLISSEMENT CENTRAL DES APPR |
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMFZ | SECOND END DIAMETER | 0.3125 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.3125 INCHES NOMINAL |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| ABHP | OVERALL LENGTH | 2.620 INCHES NOMINAL |
| AAHW | SECOND END GROOVE WIDTH | 0.2400 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.100 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.3125 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| FEAT | SPECIAL FEATURES | GROOVE IS FLATTED 0.080 IN. DP |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 CLASS 303 COND A FED SPEC SINGLE MATERIAL RESPONSE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| AGAV | END ITEM IDENTIFICATION | 2350-01-031-8851 |
| AAHX | SECOND END GROOVE DIAMETER | 0.2800 INCHES NOMINAL |