National Stock Number (NSN) Output Data
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 040351 | 31361 | A | 3 | 2 | 1 | AX | ||
| 040351 | 66503 | A | 5 | 9 | 1 | AX |
CAGE Information
| Code | Company |
|---|---|
| 31361 | WOODWARD GOVERNOR COMPANY DBA INDUST |
| 66503 | WOODWARD GOVERNOR COMPANY DBA WOODWA |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHW | SECOND END GROOVE WIDTH | 0.1406 INCHES NOMINAL |
| AMDW | FIRST END SLOT DEPTH | 0.094 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.3750 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.234 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.1280 INCHES NOMINAL |
| AKTM | FIRST END SLOT WIDTH | 0.062 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.3750 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SLOTTED |
| AAHX | SECOND END GROOVE DIAMETER | 0.3370 INCHES NOMINAL |
| BDSR | SECOND END SPLINE QUANTITY | 36 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.3520 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AMHD | SECOND END HOLE DEPTH | 0.031 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 0.453 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.453 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.3750 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 3.360 INCHES NOMINAL |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED, CROSS DRILLED HOLE AND SPLINED (STRAIGHT) |
| CSYM | SURFACE FINISH | 2.0 MICROINCHES |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.234 INCHES NOMINAL |