National Stock Number (NSN) Output Data
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| A38236 | 10988 | A | 3 | 2 | 2 | AX |
CAGE Information
| Code | Company |
|---|---|
| 10988 | CNH AMERICA LLC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMGS | SECOND END HOLE DIAMETER | 0.1850 INCHES MINIMUM AND 0.1920 INCHES MAXIMUM |
| AMGS | SECOND END HOLE DIAMETER | 0.1850 INCHES MINIMUM AND 0.1920 INCHES MAXIMUM |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| FEAT | SPECIAL FEATURES | 1FIRST END THREE CIR FLATS 0.190 R;TWO CIR FLATS IN LINE W/FLAT GROOVE ON FIRST END,0.504 IN. DISTANCE FROM CIR FLAT CTR TO END,0.843 IN. DISTANCE BTWN CIR FLAT CTR;THIRD CIR FLAT 1.347 IN. DISTANCE FROM CTR TO END,90 DEG ANGLE BTWN CIR FLATS |
| AMHD | SECOND END HOLE DEPTH | 0.622 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 2.590 INCHES NOMINAL |
| AMJA | SECOND END GROOVED FLAT LENGTH | 1.6250 INCHES NOMINAL |
| AMJB | SECOND END GROOVED FLAT DEPTH | 0.062 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.6220 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 0.6220 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| AAHP | SECOND END STYLE | FLAT GROOVE AND CROSS DRILLED HOLE |
| ABHP | OVERALL LENGTH | 7.030 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1141 |
| AMFJ | SECOND END DISTANCE FROM END TO FLAT | 0.251 INCHES NOMINAL |