National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| 7595733 |
19200 |
A |
3 |
2 |
X |
XX |
|
|
CAGE Information
| Code |
Company |
| 19200 |
U S ARMY ARMAMENT RESEARCH & DEVELOP |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAHG |
FIRST END GROOVE WIDTH |
0.0400 INCHES NOMINAL |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763,TYPE A,CLASS 7 FED SPEC SINGLE MATERIAL RESPONSE |
| AAHP |
SECOND END STYLE |
UNTHREADED CROSS DRILLED |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES |
| AAGZ |
FIRST END STYLE |
CIRCULAR GROOVED |
| AGAV |
END ITEM IDENTIFICATION |
2350-00-049-4791 |
| AMGS |
SECOND END HOLE DIAMETER |
0.0940 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| ABHP |
OVERALL LENGTH |
2.0930 INCHES NOMINAL |
| AMFZ |
SECOND END DIAMETER |
0.3750 INCHES NOMINAL |
| AMCY |
FIRST END DISTANCE FROM END TO GROOVE |
0.1160 INCHES NOMINAL |
| CSPY |
LARGEST STEP DIAMETER |
0.4997 INCHES NOMINAL |
| AMGT |
SECOND END DISTANCE FROM HOLE CENTER TO END |
0.7340 INCHES NOMINAL |
| AMDL |
FIRST END DIAMETER |
0.4997 INCHES NOMINAL |
| AAHH |
FIRST END GROOVE DIAMETER |
0.4740 INCHES NOMINAL |
| ATPC |
STEP QUANTITY |
5 |
Similar Parts