National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| BL719084 | 01714 | A | 5 | 9 | 6 | AX | ||
| 7607853 | 19200 | A | D | 9 | A | AX | ||
| BL719084 | 64959 | R | 5 | 9 | 6 | AX | ||
| BL719084 | 70408 | F | 5 | 9 | 6 | AX | ||
| 7606670 | 19200 | A | 5 | 2 | E | AX | ||
| 7607853-1 | 19200 | A | 3 | 2 | E | AX |
CAGE Information
| Code | Company |
|---|---|
| 01714 | LUCENT TECHNOLOGIES INC ADVANCED TEC |
| 19200 | U S ARMY ARMAMENT RESEARCH & DEVELOP |
| 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO |
| 70408 | AT AND T CORP |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-586 FED SPEC SINGLE MATERIAL RESPONSE |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| AMDL | FIRST END DIAMETER | 0.1717 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.3120 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.297 INCHES NOMINAL |
| AMCW | FIRST END FLAT DEPTH | 0.0417 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | FLATTED |
| CSPY | LARGEST STEP DIAMETER | 0.312 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.0450 INCHES NOMINAL |
| AMCX | FIRST END FLAT LENGTH | 0.219 INCHES NOMINAL |
| AMHD | SECOND END HOLE DEPTH | 0.250 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.156 INCHES NOMINAL |
| MATT | MATERIAL | NICKEL ALLOY |