National Stock Number (NSN) Output Data
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 7444510P1 | 24446 | A | 5 | 9 | X | XX | ||
| 7444510 | 03538 | A | 3 | 2 | 1 | AX |
CAGE Information
| Code | Company |
|---|---|
| 03538 | LOCKHEED MARTIN CORPORATION DBA MS2 |
| 24446 | GENERAL ELECTRIC CO |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMGE | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.3933 INCHES MINIMUM AND 0.3963 INCHES MAXIMUM |
| BDSR | SECOND END SPLINE QUANTITY | 12 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.3358 INCHES MINIMUM AND 0.3438 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | COPPER ALLOY |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.3933 INCHES MINIMUM AND 0.3963 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 0.3933 INCHES MINIMUM AND 0.3963 INCHES MAXIMUM |
| AMGF | SECOND END PITCH DIAMETER | 0.3750 INCHES NOMINAL |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| AMEB | FIRST END HOLE DEPTH | 0.393 INCHES MINIMUM AND 0.396 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 1.781 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.187 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
| ABHP | OVERALL LENGTH | 1.781 INCHES NOMINAL |
| AMDX | FIRST END HOLE DIAMETER | 0.0932 INCHES MINIMUM AND 0.0935 INCHES MAXIMUM |