National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| SM-B-502629 | 80063 | A | 5 | 2 | 1 | TX | ||
| 666276-090 | 12436 | A | 3 | 2 | 1 | TX |
CAGE Information
| Code | Company |
|---|---|
| 12436 | BAE SYSTEMS NATIONAL SECURITY SOLUTI |
| 80063 | US ARMY COMMUNICATIONS & ELECTRONICS |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMFZ | SECOND END DIAMETER | 0.7500 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | 0.740 INCHES NOMINAL |
| AMGR | SECOND END SLOT DEPTH | 0.100 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 7 |
| MATT | MATERIAL | STEEL COMP 303 |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| AAHP | SECOND END STYLE | SLOTTED AND INTERNALLY THREADED |
| CSPY | LARGEST STEP DIAMETER | 0.750 INCHES NOMINAL |
| AAHG | FIRST END GROOVE WIDTH | 0.0290 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,TYPE A,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE |
| AAHH | FIRST END GROOVE DIAMETER | 0.2200 INCHES NOMINAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.280 INCHES NOMINAL |
| AKTN | SECOND END SLOT WIDTH | 0.390 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.2750 INCHES NOMINAL |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 0.331 INCHES NOMINAL |