Follow Us on Google+

Request A Price Quote:

National Stock Number (NSN) Output Data

NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED

Definition:

A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.

Reference/Part Number

Part Number CAGE Status RNCC RNVC DAC RNAAC MSDS SADC
RD17675-1 51663 A 3 2 2 CT

CAGE Information

Code Company
51663 CRANE CO. DBA LEAR ROMEC

Characteristics (Decoded)

MRC Requirements Statement Clear Text Reply
AAHN END SIMILARITY NOT IDENTICAL
CSPY LARGEST STEP DIAMETER 0.3747 INCHES MINIMUM AND 0.3749 INCHES MAXIMUM
AMCY FIRST END DISTANCE FROM END TO GROOVE 0.604 INCHES MINIMUM AND 0.612 INCHES MAXIMUM
CSYM SURFACE FINISH 16.0 MICROINCHES
ABHP OVERALL LENGTH 1.342 INCHES MINIMUM AND 1.345 INCHES MAXIMUM
AMDL FIRST END DIAMETER 0.3747 INCHES MINIMUM AND 0.3749 INCHES MAXIMUM
AAGZ FIRST END STYLE CIRCULAR GROOVED
AMGA SECOND END SPLINE LENGTH 0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM
BDSR SECOND END SPLINE QUANTITY 8
AAHP SECOND END STYLE SPLINED (STRAIGHT)
AMGB SECOND END SPLINE MINOR DIAMETER 0.2409 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
MDCL MATERIAL DOCUMENT AND CLASSIFICATION MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE
ATPC STEP QUANTITY 3
FEAT SPECIAL FEATURES DISTANCE BETWEEN HOLE CENTERS 0.280 IN. MIN,0.285 IN. MAX
AAHG FIRST END GROOVE WIDTH 0.0500 INCHES MINIMUM AND 0.0540 INCHES MAXIMUM
MATT MATERIAL STEEL COMP 4140
AMFZ SECOND END DIAMETER 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM
AAHH FIRST END GROOVE DIAMETER 0.3500 INCHES NOMINAL
AMGC SECOND END SPLINE MAJOR DIAMETER 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM

Similar Parts

RD17675-1 , RD176751 , 3040-01-026-3014 , 3040010263014 , 010263014 , RD17675-1 ,