National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 2580116 | 80064 | A | 3 | 2 | A | KZ |
CAGE Information
| Code | Company |
|---|---|
| 80064 | NAVAL SHIP SYSTEMS COMMAND |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | CIRCULAR GROOVE 0.312 IN. RADIUS,0.312 IN. DEEP,AT EA END OF LARGEST STEP; 6 LONGITUDINAL RATCHET NOTCHES ON MAIN BODY; HOLE 0.308 IN. MIN,0.319 IN. MAX DIA,CENTERED 1.172 IN. FROM FIRST END |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.5623 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.3080 INCHES MINIMUM AND 0.3190 INCHES MAXIMUM |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDL | FIRST END DIAMETER | 0.9835 INCHES MINIMUM AND 0.9839 INCHES MAXIMUM |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| AAHG | FIRST END GROOVE WIDTH | 0.0460 INCHES MINIMUM AND 0.0490 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| AAHH | FIRST END GROOVE DIAMETER | 0.9230 INCHES MINIMUM AND 0.9290 INCHES MAXIMUM |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| ATPC | STEP QUANTITY | 2 |
| CSPY | LARGEST STEP DIAMETER | 1.125 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 12.9531 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 316 |
| AMFZ | SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.105 INCHES MINIMUM AND 0.106 INCHES MAXIMUM |