National Stock Number (NSN) Output Data
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 4849918-6 | 80064 | A | 3 | 2 | E | AX | ||
| 4849918 | 80064 | A | D | 9 | A | AX |
CAGE Information
| Code | Company |
|---|---|
| 80064 | NAVAL SHIP SYSTEMS COMMAND |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMHD | SECOND END HOLE DEPTH | 0.4990 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| AMFZ | SECOND END DIAMETER | 0.4990 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 0.151 INCHES NOMINAL |
| AMCZ | FIRST END KEYWAY WIDTH | 0.0935 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 CLASS 316 FED SPEC SINGLE MATERIAL RESPONSE |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.375 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AMDL | FIRST END DIAMETER | 0.4990 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AMGS | SECOND END HOLE DIAMETER | 0.2500 INCHES NOMINAL |
| AMDH | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 0.719 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 6.188 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | WOODRUFF KEY 0.1511 IN. DEEP BY 0.0935 IN. WIDE NEAR CENTER |
| AAGZ | FIRST END STYLE | WOODRUFF KEYWAY |