National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 2040986 | 70210 | A | D | 9 | 5 | ZZ | ||
| 2040986-1 | 70210 | A | 3 | 2 | 6 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 70210 | HONEYWELL INTERNATIONAL INC. DBA HON |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ATPC | STEP QUANTITY | 7 |
| AMDR | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | NO.5 DRILL CENTER OPTIONAL BOTH ENDS |
| AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
| AMDL | FIRST END DIAMETER | 0.3800 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.5000 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.4220 INCHES NOMINAL |
| BDSQ | FIRST END SPLINE QUANTITY | 23 |
| CSPY | LARGEST STEP DIAMETER | 0.6200 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 3.3500 INCHES NOMINAL |
| AAHN | END SIMILARITY | IDENTICAL |
| AMDS | FIRST END PITCH DIAMETER | 0.4791 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 4130 |
| AMDM | FIRST END SPLINE LENGTH | 0.3700 INCHES NOMINAL |