National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 754-6405242 FIND 18 | 53711 | A | 5 | 1 | 1 | HD | ||
| 6405242 FN 18 | 53711 | A | 5 | 1 | 1 | HD | ||
| 211092249 | 53711 | A | 3 | 1 | 5 | HD | ||
| 211092249SS | 03950 | A | 5 | 2 | 6 | HD | ||
| DF2230-2210 FN 18SS | 03950 | A | 5 | 2 | 6 | HD | ||
| 6405242 FN 18SS | 03950 | A | 5 | 2 | 6 | HD | ||
| 754-6405242 FIND 18SS | 03950 | A | 5 | 2 | 6 | HD |
CAGE Information
| Code | Company |
|---|---|
| 03950 | NAVAL INVENTORY CONTROL POINT MECHAN |
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| AMFZ | SECOND END DIAMETER | 6.0010 INCHES MINIMUM |
| ABHP | OVERALL LENGTH | 71.126 INCHES NOMINAL |
| BDSQ | FIRST END SPLINE QUANTITY | 9 |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| AMDM | FIRST END SPLINE LENGTH | 8.0950 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 7.9910 INCHES MINIMUM |
| MATT | MATERIAL | NICKEL ALLOY |
| AAHP | SECOND END STYLE | INTERNAL THREADED |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROL IN ACCORDANCE WITH NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR SUBSAFE ITEMS |
| AMDL | FIRST END DIAMETER | 7.0010 INCHES MINIMUM |