National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
PLATE , RETAINING , BEARING
Definition:
A COMPARATIVELY FLAT RIGID ITEM, WITH OR WITHOUT A CENTRALLY LOCATED APERTURE, DESIGNED TO HOLD AN ANNULAR BEARING OR A SLEEVE BEARING IN A FITTED INCLOSURE. IT MUST HAVE DRILLED AND/OR TAPPED HOLES FOR MOUNTING PURPOSES. EXCLUDES END BELL, ELECTRICAL ROTATING EQUIPMENT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 2123870 | 10001 | A | 3 | 2 | A | KZ |
CAGE Information
| Code | Company |
|---|---|
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
Federal Supply Class
Title
BEARINGS, ANTIFRICTION, UNMOUNTE
Inclusions:
INCLUDES BALL BEARINGS; ROLLER BEARINGS; BALLS; RACES.
Exclusions:
EXCLUDES PLAIN BEARINGS (FSC 3120); JEWEL BEARINGS (FSC 3120)
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | THE ITEM IS COATED WITH A DRYING TYPE PRESERVATIVE OIL CONFORMING TO DWG1603000; A SECOND SET OF BOLT HOLES CONSISTING OF 0.250-20UNC-3B-BOTTOM TAP NUMBER 4(209)DRILL 0.650 INCH DEEP PLUS 0.31 AND MINUS 0.31 INCH VARIATION COUNTERSUNK 90 DEGREES MINUS 0 AND PLUS 10 DEGREES VARIATION WITH A DIAMETER OF 0.281 INCHES WITH FOUR HOLES |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | 1.937 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.406 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | SQUARE |
| ADNZ | DISTANCE BETWEEN HOLES ALONG WIDTH | 1.937 INCHES NOMINAL |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | FOUR HOLES |
| MATT | MATERIAL | STEEL COMP 1020 OVERALL |
| SFTT | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A576 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR ASTM A575 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ABVL | APERTURE DIAMETER | 1.250 INCHES NOMINAL |
| ABRY | LENGTH | 2.675 INCHES NOMINAL |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| CWJN | DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.968 INCHES NOMINAL |
| CWHW | DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.968 INCHES NOMINAL |