Part Number
Part Number:
NSN:
NIIN:
Item Name:
BELLOWS , PRESSURE
Definition:
A MECHANISM HAVING TWO OR MORE FOLDED OR CORRUGATED WALL SURFACES, WHICH CAN EXPAND OR CONTRACT LINEARLY. CONVERTS PRESSURE EFFECTS INTO CONTROLLED LINEAR MOVEMENT OR PROVIDES A PRESSURE SIGNAL TO ANOTHER DEVICE. MAY CONTAIN HEAD, CAPS AND/OR STEM.
CAGE Information
| Code | Company |
|---|---|
| 07649 | SENIOR OPERATIONS LLC DBA METAL BELL |
Federal Supply Class
Title
TORQUE CONVERTERS AND SPEED CHAN
Inclusions:
INCLUDES FLUID COUPLINGS; NONVEHICULAR CLUTCHES AND COUPLINGS; HORIZONTAL RIGHT ANGLE DRIVE GEAR UNITS.
Exclusions:
EXCLUDES AUTOMOTIVE TORQUE CONVERTERS (FSC 2520); VEHICULAR POWER TRANSMISSION COMPONENTS (FSC 2520); ROTARY AIRCRAFT TRANSMISSION GEAR UNITS (FSC 1615).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | TEST SET,ALTIMETER WARNING AN/APM-254 |
| FEAT | SPECIAL FEATURES | CONSISTS OF COLLAPSIBLE SIDEWALLS NOT LESS THAN 1.98 INCHES INNER DIAMETER AND NOT GREATER THAN 3.27 INCHES OUTER DIAMETER WITH 18 CONVOLUTIONS AT .004 INCHES THICKNESS ON EACH FOLD OR 20 CONVOLUTIONS AT .003 INCHES THICKNESS ON EACH FOLD; MATERIAL: PLASTIC AND STEEL; TUBING PER MIL-T-8808; PROTRUDING TUBING SECTION AT 30 DEGREE ANGLE FROM STEEL PLATE WITH DIAMETER OF .250 INCHES; DISTANCE FROM CENTER AXIS OF TUBING TO PERIMETER SHALL BE 1.688 INCHES; LENGTH AND WIDTH OF STEEL PLATES SHALL BE 3.38 INCHES; PROTRUDING SHAFT FROM STEEL PLATE OPPOSITE PLATE WITH TUBING SHALL BE 2.50 INCHES WITH DIAMETER OF .020; EXTENDED LENGTH OF BELLOWS AT 8500 FEET ALTITUDE SHALL BE 2.25 INCHES AND AT 7000 FEET SHALL BE 1.9 INCHES; 1 HOLE AT EACH OF 8 CORNERS OF PERIMETER FOR TOTAL OF 8 HOLES; DUST CAP PROVIDED |