Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 33654 | HOWDEN FLUID SYSTEMS |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-27267 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQBD | BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| ABKV | OUTSIDE DIAMETER | 0.562 INCHES NOMINAL |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| ADJM | INNER CONVEYING TUBE MATERIAL | PLASTIC, POLYTETRAFLUOROETHYLENE |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | NUT STEEL, FED STD 66, AISI 303/SAE 30303 |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| AAJD | THREAD CLASS | 3B 1ST END |
| CRFY | FLOW ANGLE | 45.0 DEGREES 1ST END |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | NUT STEEL, FED STD 66, AISI 303/SAE 30303 |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | AGE RESISTANT AND CORROSION RESISTANT |
| CRXX | MEASURING METHOD AND LENGTH | 12.250 INCHES NOMINAL OVERALL |
| AAJD | THREAD CLASS | 3B 2ND END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| ABJH | TEMP RATING | 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 4.625 INCHES |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED STEEL WIRE |
| AARX | INSIDE DIAMETER | 0.406 INCHES NOMINAL |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 270.0 |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |