Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 80294 | BOURNS INSTRUMENTS INC |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABPM | BODY DIAMETER | 1.000 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.000 INCHES MAXIMUM |
| AAPN | SECTION QUANTITY | 1 |
| AEDX | SHAFT STYLE | ROUND |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AEFM | MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES |
| ABHP | OVERALL LENGTH | 1.490 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 1.130 INCHES NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/+3.0 SINGLE SECTION |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 30003-67A58A59 DRAWING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.680 INCHES NOMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 1800.0 NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES |
| AEFK | MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| ABXF | SHAFT LENGTH | 0.810 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.0 |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| AGAV | END ITEM IDENTIFICATION | OLIVER PERRY CLASS FFG; KIDD CLASS DDG; TICONDEROGA CLASS CG (47); CATAPULT/ARRESTING GEAR; SPRUANCE CLASS DD (963); ARLEIGH BURKE CLASS DDG; RECOVERY ASSIST, SECURING AND TRAVERING (RAST); SYSTEM; HELICOPTER LANDING SYSTEM, LAMPS MK III |
| AEFP | NONTURN DEVICE RADIUS | 0.290 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1800.0 NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.248 INCHES NOMINAL |