Part Number
Part Number:
NSN:
NIIN:
Item Name:
STUD , PLAIN
Definition:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. THE MAXIMUM DIAMETER OF THE UNTHREADED PORTION MUST NOT BE GREATER THAN THE NOMINAL THREAD DIAMETER PLUS 0.020 INCHES (0.508 MM). THE UNTHREADED PORTION MUST BE WITHOUT LOCKING OR WRENCHING PROVISIONS. IT MAY BE THREAD RELIEVED. SEE ALSO ROD, THREADED END AND ROD, CONTINUOUS THREAD.
CAGE Information
| Code | Company |
|---|---|
| 23040 | FORD MOTOR CO FORD PARTS AND SERVICE |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATT | MATERIAL | STEEL COMP 8640 |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL OR ZINC OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD |
| AASA | THREAD LENGTH | 0.760 INCHES MINIMUM STUD THREAD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE |
| ABHP | OVERALL LENGTH | 3.300 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | STUD THREAD END 0.004 IN. OVERSIZE |
| AASA | THREAD LENGTH | 0.740 INCHES MINIMUM NUT THREAD |
| AAJF | THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| CMLP | THREAD QUANTITY PER INCH | 16 STUD THREAD |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
| THSD | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
| AAJE | THREAD PITCH DIAMETERS | +0.3434/+0.3450 INCHES STUD THREAD |
| AAJF | THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| CMLP | THREAD QUANTITY PER INCH | 24 NUT THREAD |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD |