Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
CAGE Information
| Code |
Company |
| 23040 |
FORD MOTOR CO FORD PARTS AND SERVICE |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABNM |
THICKNESS |
0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| ABNM |
THICKNESS |
0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| MATT |
MATERIAL |
STEEL COMP 1010 OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND ZINC OVERALL |
| CQFM |
HARDNESS RATING |
75.0 ROCKWELL B MINIMUM AND 85.0 ROCKWELL B MAXIMUM |
| ADAV |
OVERALL DIAMETER |
0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| AAUB |
HOLE DIAMETER |
0.445 INCHES MINIMUM AND 0.455 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5040 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
Similar Parts