Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 14028 | SYPRIS ELECTRONICS LLC |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| FEAT | SPECIAL FEATURES | AIRCRAFT,F-111 |
| ADAQ | BODY LENGTH | 1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL |
| AAPN | SECTION QUANTITY | 1 |
| ADAT | BODY WIDTH | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0/+250.0 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| AEFL | MAXIMUM RUNNING TORQUE | 8.00 INCH-OUNCES |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-22097 SPECIFICATION |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.300 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION |
| CBME | CUBIC MEASURE | 0.075 CUBIC INCHES |
| ABXF | SHAFT LENGTH | 0.036 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AEFK | MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ABJT | TERMINAL LENGTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| ABWV | SHAFT DIAMETER | 0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | +0.0/+2.5 -25 DEG CELSIUS SINGLE SECTION AND +0.0/+4.5 -55 DEG CELSIUS SINGLE SECTION AND -1.5/+1.5 85 DEG CELSIUS SINGLE SECTION AND -4.0/+4.0 125 DEG CELSIUS SINGLE SECTION |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |