Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 13499 | ROCKWELL COLLINS INC. DBA GOVERNMENT |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADAT | BODY WIDTH | 0.170 INCHES NOMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 5400.0 MINIMUM AND 10800.0 MAXIMUM |
| AAPN | SECTION QUANTITY | 1 |
| ABWV | SHAFT DIAMETER | 0.075 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AXGY | MOUNTING METHOD | TERMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-PRF-39035/2 GOVERNMENT SPECIFICATION |
| TEST | TEST DATA DOCUMENT | 81349-MIL-PRF-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AAQL | BODY STYLE | RECTANGULAR |
| ABJT | TERMINAL LENGTH | 0.300 INCHES MINIMUM |
| ADAU | BODY HEIGHT | 0.375 INCHES NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 NOMINAL INCHES |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 5400.0 MINIMUM AND 10800.0 MAXIMUM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ABXF | SHAFT LENGTH | 0.080 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 7TH SECONDARY QUALITY |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.420 INCHES MAXIMUM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0/+100.0 SINGLE SECTION |